User Guide

Local Management User’s Guide B-1
B WPIM-E1 Configuration
This Appendix explains how to configure the WPIM-E1 through Local Management. Sections of
this chapter include:
• Full T-1 Configuration Using PPP
• Fractional T-1 Configuration Using PPP
• Frame Relay Configuration
THE WAN PHYSICAL CONFIGURATION SCREEN
To access the WAN Physical Configuration screen from the Feature Selection screen, use the arrow
keys to highlight the WAN Configuration option, then press ENTER. The screen shown in
Figure B-1 displays.
Figure B-1 WAN Physical Configuration Screen
SAVE WAN INT CONFIG RETURN
Type: E1
WPIM #: 1
MgrType: [PPP]
Max VCs: 032
NextIF: 002
Type: Sync
WPIM #: 2
MgrType: [FR PtoMP]
Max VCs: 063
NextIF: N/A
WAN PHYSICAL CONFIGURATION
E1 Timeslot View: [Active]
E1 Line Coding: [HDB3]
E1 Frame Type: [E1-CRC]
E1 Tx Clock Source: [Loop-Timing]
E1 Loop-back: [Line-Loop]
WPIM 1 Timeslot Configuration
N/A 000 000 000 000000 000 000
01-08
09-16
17-24
WPIM 1 Line Configuration
000 000 000 000 000000 000 000
000 000 000 000 000000 000 000
000 000 000 000 000000 000 000
25-32
1484_01
<host name> Local Management Flash Image Version: xx.xx.xx
[WPIM 1]
WPIM 1 WPIM 2
REMOTE SETUP