User Guide

MIB Navigator
3-30 Local Management User’s Guide
ppp:
Syntax: ppp
Description: The ppp command provides additional status relating to PPP and its
Network Control Protocols.
Options: Not Applicable
reset:
Syntax: reset
Description: The reset command allows you to perform a soft reset of the device. You
are queried to confirm the reset command to insure against unwanted
resets.
Options: Not Applicable
route:
Syntax: route add <IPADDRESS> <IPADDRESS> <INTERFACENUM>
route add <IPADDRESS> <IPADDRESS> <INTERFACENUM>
<METRIC>
route delete <IPADDRESS> <IPADDRESS> <INTERFACENUM>
Description: The route command allows you to add or delete static entries in the IP
Forwarding Table for the device. The first address is the destination. The
second address is the next hop for the given interface. The metric value
is optional. If included, it is used to set the value of
ipForwardingMetric1. When RIP is used, the metric specifies the
distance in hops to the destination.
NOTE
The MIB Navigator’s connection to the device is terminated upon execution of this
command.