User Guide

MIB Navigator
3-22 Local Management User’s Guide
Example:
defroute:
Syntax: defroute [interface number] [IP address]
Description: The defroute command allows you to set the default IP route to a
managed device through the specified interface.
Options: Not Applicable
Example:
dhcp:
Syntax: dhcp <options>
Description: The dhcp command provides a status of the Dynamic Host Configuration
Protocol feature. It allows you to enable/disable DHCP globally and by
interface, and to configure interfaces with server parameters.
Options: dhcp (with no options) Displays DHCP status information.
dhcp enable/disable Enables or disables the DHCP feature globally.
dhcp <IFNUM> enable disable Enables or disables the DHCP feature
by interface.
dhcp reclaim <IPADDRESS> Reclaims an IP address so another client
can use it.
Node
00:00:1d:23:a1:5b
00:00:1d:23:a1:5b
Circuit ID
203
102
# Interface
# 2
# 2
Network
5A4C212B
00000172
MIBNav-> circuitmap -s IPX 2 00000172 00:00:1d:02:d1:7a 102
MIBNav-> circuitmap -a
ii
MIBNav-> defroute 2 147.152.42.32