User Guide

MIB Navigator
3-18 Local Management User’s Guide
setidletimeout:
Syntax: setidletimeout <IFNUM> <TRANSMITIDLETIMEOUT>
<RECEIVEIDLETIMEOUT>
Description: The setidletimeout command allows you to set the idle time out value in
seconds in which a packet needs to be transmitted/received before the
interface is automatically disconnected.
Options: Not Applicable
Example:
setalarmtime:
Syntax: setalarmtime <WANPORTNUM> <ALARMTIMEOUT>
Description: The setalarmtime command allows you to set the time out value in
seconds in which the physical port must remain in a failed state to begin
the backup procedure.
Options: Not Applicable
Example:
setmaxprofiles:
Syntax: setmaxprofiles <IFNUM> <MAXPROFILESNUM>
Description: The setmaxprofiles command allows you to set the maximum number of
profiles for an interface.
Options: Not Applicable
Example:
MIBNav-> setidletimeout 8 180 160
MIBNav-> setalarmtime 1 15
MIBNav-> setmaxprofiles 8 16