User Guide

MIB Navigator
3-4 Local Management User’s Guide
PPP Security and Spoofing Commands — Commands that allow you to set PPP security and
to set up spoofing. The commands, detailed starting on page 3-14, are as follows:
ISDN and Backup Commands — Commands that allow you to configure ISDN, and setup
primary and backup configurations. The commands, detailed starting on page 3-16, are as follows:
Other Commands — Other commands allow you to access and manage network devices
connected to the device running the MIB Navigator. The commands, detailed starting on
page 3-20, are as follows:
Special Commands —Special Commands allow you to exit from the MIB Navigator. The
commands, detailed starting on page 3-35, are as follows:
pppsecurity setspoof
setbackup setisdnbri setswitchtype ct
dt setidletimeout setalarmtime setmaxprofiles
setdemandif isdnstat ic
arp bridge circuitmap defroute
dhcp ds1alarm fr imux
nat netstat ping ppp
redistribute reset route secondIP
show snmpbranch snmpget snmpnext
snmpset snmptree traceroute wanpq
done quit exit