User Guide

MIB Navigator
3-2 Local Management User’s Guide
MIB Navigator Screen
Access the MIB Navigator screen from the Main Menu screen using Local Management (refer to
the Accessing Local Management section in Chapter 1). Using the arrow keys, highlight the
MIB NAVIGATOR menu item, then press ENTER. At the MIB Navigator cursor, type Help and
press ENTER. The MIB Navigator Help screen shown in Figure 3-1 displays.
Figure 3-1 MIB Navigator Help Screen
Managing Device MIBs
The MIB Navigator lets you manage objects in the HSIM or CyberSWITCH Management
Information Bases (MIBs). MIBs are databases of objects used for managing the device and
determining the device’s configuration. The commands within the MIB Navigator enable you to
view and modify a device’s objects.
Welcome to MIB Navigator
MIBNav-> help
Commands Available to the User :
Navigation commands :
branch cd ctron dir get grep
ls mib2 next pwd set su
tree wan whoami
PPP Security Configuration:
pppsecurity
Spoofing activation/setup command:
setspoof
Isdn configuration, primary/backup setup commands :
setbackup setisdnbri setswitchtype ct
dt setidletimeout setalarmtime setmaxprofiles
setdemandif isdnstat ic
Other commands :
arp bridge circuitmap defroute dhcp ds1alarm
fr imux nat netstat ping ppp
redistribute reset route secondIP show snmpbranch
snmpget snmpnext snmpset snmptree traceroute wanpq
SPECIAL :
done, quit, or exit - Exit from the MIB Navigator.
mib2 - Change directory to MIB II (/1/3/6/1/2/1).
ctron - Change directory to Cabletrons MIB (/1/3/6/1/4/1/52)
wan - Change directory to Cabletrons WAN MIB (/1/3/6/1/4/1/52/4/1/2/7/2)
For help with a specific command, type 'help <command>'.
MIBNav->