Installation guide

SecureStack C3 Installation Guide 1-1

Introduction

ThischapterintroducestheC3G124‐24PandC3G124 ‐48PPoEGigabitEthernetstackable

switches.

Overview

TheC3G124‐24PandC3G124‐48Parestackableswitchesthatcanbeadaptedandscaledto

helpmeetyournetworkrequirements.Theseswitchesprovideamanagementplatform

andanuplinktoanetworkbackboneforastackedgroupofuptoeightC3switches.

YoucanalsousearedundantDC

powersupplywiththeseswitchestohelpprevent

downtimeduetoaninternalpowersupplyfailureintheswitchorACpowersource.

Youcaninstalltheswitch

onaflatsurfaceorintoastandard19‐inchrackwithuser‐

suppliedmountinghardware,andconfiguretheswitchfunctionsusingtheWebView™

application,CLIswitchingcommands,and/orSNMP.

C3G124-24P Stackable Switch

TheC3G124‐24P(Figure 1‐1)hasseveraltypesoffrontpanelportconnections,which

include:

•Twenty‐fourRJ45ports(10/100/1000Mbps,1000BASE‐Tcopperports)thatalso

supportPoEforconnectionstoIEEE802.3afcompliantPDs(powereddevices).

For information about... Refer to page...

Overview 1-1

PoE (Power over Ethernet) Support 1-5

Connectivity 1-6

Management 1-7

Standards Compatibility 1-7

LANVIEW Diagnostic LEDs 1-8