Installation guide

Standards Compatibility
SecureStack C3 Installation Guide 1-5
Switch Configuration Using CLI Commands
TheCLIcommandsenableyoutoperformmorecompleteswitchconfiguration
managementtasks.
ForCLIcommandsetinformationandhowtoconfigurethemodule,refertothe
SecureStackC3ConfigurationGuide.
Standards Compatibility
The1000BASE‐Tports arecompliantwiththefollowingstandardsandoperations:
• IEEE802.3
• IEEE802.3u
• IEEE802.3ab
•Full‐Duplexoperation
TheSFPportsarecompliantwiththefollowingstandardsandoperations:
• IEEE802.3z
• IEEE802.3xFlowControlsupportforFull‐Duplexmode
•Auto‐negotiationforFull‐Duplexcontroloperations
LANVIEW Diagnostic LEDs
LANVIEWdiagnosticLEDsserveasanimportanttroubleshootingaidbyprovidingan
easywaytoobservethestatusofindividualportsandoverallnetworkoperations.
Referto“UsingLANVIEW”onpage 4‐2formoreinformation.