Installation guide

SecureStack C3 Installation Guide 1-1

Introduction

ThischapterintroducestheC3G124‐24andC3G124‐48 st ackableswitches.

Overview

TheC3G124‐24andC3G124‐48arestackableGigabitEthernetswitches,whichcanbe

adaptedandscaledtohelpmeetyournetworkneeds.Theseswitchesprovidea

managementplatformanduplinktoanetworkbackboneforastackedgroupofupto

eightC3switches.Thefourbuilt‐inSmallForm

Pluggable(SFP)interfaceslotsprovide

youwiththeoptionofinstallingMini‐GBICsfor1000BASE‐SX/LXfiber‐opticconnections

and1000BASE‐Tcopperconnections.

YoucanalsousearedundantDCpowersupplywiththeseswitchestohelpprevent

downtimeduetoaninternalpowersupplyfailureintheswitchor

ACpowersource.

Youcaninstalltheswitch

onaflatsurfaceorintoastandard19‐inchrackwithuser‐

suppliedmountinghardware,andconfiguretheswitchfunctionsusingtheWebView™

application,CLIswitchingcommands,and/orSNMP.

C3G124-24 and C3G124-48

TheC3G124‐24(Figure 1‐1)andC3G124‐48( Figure 1‐2)haveseveraltypesoffrontand

rearpanelportconnections,whichinclude:

•RJ45ports(10/100/1000Mbps,1000BASE ‐Tcopperports),24ontheC3G124‐24and48

ontheC3G124‐48

For information about... Refer to page...

Overview 1-1

Connectivity 1-4

Management 1-4

Standards Compatibility 1-5

LANVIEW Diagnostic LEDs 1-5