Specifications

clear license
SecureStack C3 Configuration Guide 3-33
clear license
Usethiscommandtoclearthelicensekeysettings.Ifmultipleswitchesareusedinthestack,you
canusetheallparametertoclearalltheswitchesatonce.
Syntax
clear license featureId feature {all | unit number}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Ifyouclearalicensefromamemberunitinastackwhilethemasterunithasanactivatedlicense,
thestatusofthememberunitwillchangeto“ConfigMismatch”anditsportswillbedetached
fromthestack(thatis,willnotpasstraffic).
Ifyouclearalicensefrom
themasterunitofastack,thememberunitswillremainattachedtothe
stackbutthelicensedfunctionalitywillnolongerbeavailabletothememberunits,evenifthey
havelicensesinstalled.
Licensescanbedisplayed,applied,andclearedonlywiththe licensecommandsdescribedinthis
chapter.General
configurationcommandssuchasshowconfigorclearconfigdonotaffect
licenses.
Examples
ThisexampleshowshowtocleartheAdvancedRoutinglicensedfeatureonstackunit3.
C3(rw)->clear license featureId advrouter unit 3
ThisexampleshowshowtocleartheAdvancedRoutinglicensedfeatureonalltheunitsinastack:
C3(rw)->clear license featureId advrouter all
featureIDfeature Thenameofthefeaturebeingcleared.
all Clearsthelicensekeysettingsonallunitsinthestack.
unitnumber Clearsthelicensekeysettingsonthespecifiedswitch.Unitnumbercan
rangefrom1to8.
RefertoChapter 2,ConfiguringSwitchesinaStackformore
informationaboutstack
unitIDs,ornumbers.