Specifications

show license
3-32 Basic Configuration
show license
Usethiscommandtodisplaylicensekeyinformationforswitches withactivatedlicenses.
Syntax
show license [unit number]
Parameters
Defaults
Ifnounitnumberisspecified,licensekeyinformationforallswitchesinthe stackisdisplayed.
Mode
Switchcommand,read‐only.
Usage
Licensescanbedisplayed,applied,andclearedonlywiththe licensecommandsdescribedinthis
chapter.Generalconfig urationcommandssuchasshowconfigorclearconfigdonotaffect
licenses.
Example
Thisexampleshowshowtodisplaylicensekeyinformatioinforswitchunit1inthestack.
C3(ro)->show license unit 1
unit 1
key: INCREMENT advrouter 2006.0728 permanent 31173CAC6495 045100039001
status: Active
unitnumber (Optional)Specifiestheswitchinastackforwhichtodisplaylicense
information.
RefertoChapter 2,ConfiguringSwitchesinaStack,formore
informationaboutstackunitIDs,ornumbers.