Specifications

set license
SecureStack C3 Configuration Guide 3-31
set license
UsethiscommandtoactivatetheSecureSt ackC3licensedfeatures.
Syntax
set license type feature DBV expiration key hostid
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Ifmultipleswitchesareusedinastack,anindividuallicenseisrequiredforeachstackmember.
Referto“LicensingProcedureinaStackEnvironment”onpage3‐29formoreinformation.
Whenactivatinglicenseswiththiscommand,EnterasysNetworksrecommendsthatyoucopyand
pastetheentirelicensecharacter
string,ratherthanenterthetextmanually.Ifyouenterthe
characterstringmanually,ensurethatyouexactlymatchthecapitalizationofthecharacterstring
senttoyou.
Everylicenseisassociatedwithaspecifichardwareplatform,basedontheserialnumberofthe
hardwareplatform.Ifyouneedtomove
alicensefromonehardwareplatformtoanother,you
mustcontactEnterasysCustomerSupporttoarrangeforre‐hostingofthelicense.
Example
Thisexampleshowshowtoactivateapermanentlicensekeyontheswitchwithserialnumber
045100039001.In thisexample,theswitchisastand‐aloneunitsoitsunitnumberis1.
C3(rw)->set license INCREMENT advrouter 2006.0728 permanent 31173CAC6495
045100039001
Validating license on unit 1
License successfully validated and set on unit 1
C3(rw)->
type Specifiesthetypeoflicense.FortheSecureStackC3,thevalueinthisfield
isalwaysINCREMENT.
feature Thenameofthefeaturebeingli censed.
DBV Adate‐relatedstringgeneratedaspartofthelicense.
expiration Indicateswhetherthelicenseisapermanentoranevaluationlicense.If
thelicenseisan
evaluationlicense,thisfieldwillcontaintheexpiration
dateofthelicense.Ifthelicenseisapermanentlicense,thisfieldwill
containtheword“permanent.”
key Thelicensekey.
hostid Theserialnumberoftheswitchtowhichthislicenseapplies.