Specifications

set width
SecureStack C3 Configuration Guide 3-25
Example
Thisexampleshowshowtosetthesystemcontactstring:
C3(su)->set system contact “Joe Smith”
set width
Usethiscommandtosetthenumberofcolumnsfortheterminalconnectedtotheswitch’sconsole
port.
Syntax
set width screenwidth [default]
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
ThenumberofrowsofCLIoutputdisplayedissetusingthesetlengthcommandasdescribedin
“setlength”onpage3‐25.
Example
Thisexampleshowshowtosettheterminalcolumnsto50:
C3(su)->set width 50
set length
UsethiscommandtosetthenumberoflinestheCLIwilldisplay.Thiscommandispersistent
(writtentoNV‐RAM).
Syntax
set length screenlength
screenwidth Setsthenumberofterminalcolumns.Validvaluesare50to150.
default (Optional)Makesthissettingpersistentforallfuturesessions(writtento
NV‐RAM).