Specifications

set system name
3-22 Basic Configuration
Syntax
show version
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayversioninformation.Pleasenotethatyoumayseedifferent
informationdisplayed,dependingonthetypeofhardwareinthestack.
C3(su)->show version
Copyright (c) 2004 by Enterasys Networks, Inc.
Model Serial # Versions
-------------- ----------------- -------------------
C3G124-48P 04370007900B Hw:BCM5695 REV 17
Bp:01.00.23
Fw:1.00.xx
BuFw:02.01.30
PoE:290_21
Table 3‐3providesanexplanationofthecommandoutput.
set system name
Usethiscommandtoconfigureanameforthesystem.
Syntax
setsystemname[string]
Table 3-3 show version Output Details
Output What It Displays...
Model Switch’s model number.
Serial # Serial number of the switch.
Versions • Hw: Hardware version number.
• Bp: BootPROM version.
• Fw: Current firmware version number.
• BuFw: Backup firmware version number.
• PoE: Power over Ethernet driver version. (Displays only for PoE switches.)