Specifications

set system enhancedbuffermode
SecureStack C3 Configuration Guide 3-15
Storage Utilization:
Type Description Size(Kb) Available (Kb)
---------------------------------------------------------------
RAM RAM device 262144 97173
Flash Images, Config, Other 31095 8094
Thisexampleshowshowtodisplayinformationabouttheprocessesrunningonthesystem.Only
partialoutputisshown.
C3(ro)->show system utilization process
TID Name 5Sec 1Min 5Min
8d45148 captureTask 0.00% 0.00% 0.00%
8e264f8 poe_monitor 0.00% 0.01% 0.05%
8ea6d38 poe_read 0.80% 0.22% 0.20%
8eb7140 vlanDynEg 0.00% 0.00% 0.00%
8f0be10 tcdpSendTask 0.00% 0.00% 0.00%
8f1c0e8 tcdpTask 0.00% 0.00% 0.00%
...
set system enhancedbuffermode
Usethiscommandtoenableordisableenhancedbuffermode,whichoptimizesbuffer
distributionfornon‐stackingsingleCoSqueueoperation.Executingthiscommandwillresetthe
switch,sothesystempromptsyoutoconfirmwhetheryouwanttoproceed.
Syntax
set system enhancedbuffermode {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoenableenhancedbuffermode:
C3(su)->set system enhancedbuffermode enable
Changes in the enhanced buffer mode will require reseting this unit.
Are you sure you want to continue? (y/n)
show time
Usethiscommandtodisplaythecurrenttimeofdayinthesystemclock.
enable|disable Enablesordisablesenhancedbuffermode.