Specifications

set pwa portcontrol
21-66 Security Configuration
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthePWAmaximumrequeststo3forallports:
C3(su)->set pwa maxrequests 3
set pwa portcontrol
ThiscommandenablesordisablesPWAauthenticationonselectports.
Syntax
set pwa portcontrol {enable | disable} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,PWAwillenabledonallports.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenablePWAonports1‐22:
C3(su)->set pwa portcontrol enable ge.1.1-22
show pwa session
UsethiscommandtodisplayinformationaboutcurrentPWAsessions.
Syntax
show pwa session [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,sessioninformationforallportswillbedisplayed.
enable|disable EnableordissablePWAonspecifiedports.
port‐string (Optional)Setsthecontrolmodeonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI
”onpage 4‐1.
port‐string (Optional)DisplaysPWAsessioninformationforspecificport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐1.