Specifications

set pwa quietperiod
SecureStack C3 Configuration Guide 21-65
Example
Thisexampleshowshowtoinitializeportsfe.1.5‐7:
C3(su)->set pwa initialize fe.1.5-7
set pwa quietperiod
Usethiscommandtosettheamountoftimeaportwillremainintheheldstateafterauser
unsuccessfullyattemptstologontothenetwork.
Syntax
set pwa quietperiod time [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,quietperiodwillbesetforallports.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthePWAquietperiodto30secondsforportsfe.1.5‐7:
C3(su)->set pwa quietperiod 30 fe.1.5-7
set pwa maxrequest
Usethiscommandtosetthemaximumnumberoflogonattemptsallowedbeforetransitioning
thePWAporttoaheldstate.
Syntax
set pwa maxrequests requests [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,maximumrequestswillbesetforallports.
time Specifiesquiettimeinseconds.
port‐string (Optional)Setsthequietperiodforspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 4‐1.
maxrequests Specifiesthemaximumnumberoflogonattempts.
port‐string (Optional)Setsthemaximumrequestsforspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 4‐1.