Specifications

set pwa displaylogo
SecureStack C3 Configuration Guide 21-61
set pwa displaylogo
UsethiscommandtosetthedisplayoptionsfortheEnterasysNetworkslogo.
Syntax
set pwa displaylogo {display | hide}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtohidetheEnterasysNetworkslogo:
C3(su)->set pwa displaylogo hide
set pwa ipaddress
UsethiscommandtosetthePWAIPaddress.ThisistheIPaddressoftheendstationfromwhich
PWAwillpreventnetworkaccessuntiltheuserisauthenticated.
Syntax
set pwa ipaddress ip-address
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetaPWAIPaddressof1.2.3.4:
C3(su)->set pwa ipaddress 1.2.3.4
display|hide DisplaysorhidestheEnterasysNetworkslogowhenthePWAwebsite
displays.
ip‐address Specifiesa globallyuniqueIPaddress.Thissamevaluemustbe
configuredintoeveryauthenticatingswitchinthedomain.