Specifications

set maclock enable
SecureStack C3 Configuration Guide 21-49
set maclock enable
UsethiscommandtoenableMAClockingononeormoreports.
Syntax
setmaclockenable[port‐string]
Parameters
Defaults
Ifport‐stringisnotspecified,MAClockingwillbeenabledonallports.
Mode
Switchcommand,read‐write.
Usage
WhenenabledandconfiguredforaspecificMACaddressandportstring,thislocksaportsothat
onlyoneendstationaddressisallowedtoparticipateinframerelay.
MAClockingisdisabledbydefaultatdevicestartup.ConfiguringoneormoreportsforMAC
lockingrequiresgloballyenablingit
onthedeviceandthenenablingitonthedesiredports.
Example
ThisexampleshowshowtoenableMAClockingonfe.2.3:
C3(su)->set maclock enable fe.2.3
Table 21-7 show maclock stations Output Details
Output What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 4-1.
MAC address MAC address of the end station(s) locked to the port.
Status Whether the end stations are active or inactive.
State Whether the end station locked to the port is a first learned, first arrival or static
connection.
port‐string (Optional)EnablesMAClockingonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 4‐1.