Specifications

set dot1x
21-16 Security Configuration
set dot1x
Usethiscommandtoenableordisable802.1Xauthentication,toreauthenticateoneormoreaccess
entities,ortoreinitializeoneormoresupplicants.
Syntax
set dot1x {enable | disable | port {init | reauth} {true | false} [port-string]}
Parameters
Defaults
Ifnoportsarespecified,thereinitializationorreauthenticationsettingwillbeappliedtoallports.
Mode
Switchcommand,read‐write.
Usage
Disabling802.1Xauthenticationglobally,bynotenteringaspecificport‐stringvalue,willenable
theEAPpass‐throughfeature.EAPpass‐throughallowsclientauthenticationpacketstobe
forwardedunmodifiedthroughtheswitchtoanupstreamdevice.
Examples
Thisexampleshowshowtoenable802.1X:
C3(su)->set dot1x enable
Thisexampleshowshowtoreinitializege.1.2:
C3(rw)->set dot1x port init true ge.1.2
enable|disable Enablesordisables802.1X.
port Enableordisable802.1Xreauthenticationorinitializationcontrolononeor
moreports.
init|reauth Configureinitializat ionorreauthenticationcontrol.
true|false Enable(true)ordisable(false)reinitialization/reauthentication.
port‐string (Optional)Specifiestheport(s)toreinitializeorreauthenticate.