Specifications

Setting Basic Switch Properties
SecureStack C3 Configuration Guide 3-9
Setting Basic Switch Properties
Purpose
TodisplayandsetthesystemIPaddressandotherbasicsystem(switch)properties.
Commands
Thecommandsusedtosetbasicsysteminformationarelistedbelow.
For information about... Refer to page...
show ip address 3-10
set ip address 3-10
clear ip address 3-11
show ip protocol 3-11
set ip protocol 3-12
show system 3-12
show system hardware 3-13
show system utilization 3-14
set system enhancedbuffermode 3-15
show time 3-15
set time 3-16
show summertime 3-17
set summertime 3-17
set summertime date 3-18
set summertime recurring 3-18
clear summertime 3-19
set prompt 3-19
show banner motd 3-20
set banner motd 3-20
clear banner motd 3-21
show version 3-21
set system name 3-22
set system location 3-24
set system contact 3-24
set width 3-25
set length 3-25
show logout 3-26
set logout 3-26