Specifications

show dot1x auth-config
SecureStack C3 Configuration Guide 21-15
Defaults
Ifnoparametersarespecified,all802.1Xsettingswillbedisplayed.
Ifport‐stringisnotspecified,informationforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Examples
ThisexampleshowshowtodisplaytheEAPOLportcontrolmodeforfe.1.1:
C3(su)->show dot1x auth-config authcontrolled-portcontrol fe.1.1
Port 1: Auth controlled port control: Auto
Thisexampleshowshowtodisplaythe802.1Xquietperiodsettingsforfe.1.1:
C3(su)->show dot1x auth-config quietperiod fe.1.1
Port 1: Quiet period: 30
Thisexampleshowshowtodisplayall802.1Xauthenticationconfigurationsettingsforge.1.1:
C3(ro)->show dot1x auth-config ge.1.1
Port : 1 Auth-Config
PAE state: Initialize
Backend auth state: Initialize
Admin controlled directions: Both
Oper controlled directions: Both
Auth controlled port status: Authorized
Auth controlled port control: Auto
Quiet period: 60
Transmission period: 30
Supplicant timeout: 30
Server timeout: 30
Maximum requests: 2
Reauthentication period: 3600
Reauthentication control: Disabled
port‐string (Optional)Limitsthedisplayofdesiredinforma tioninformationtospecific
port(s).Foradetaileddescriptionofpossibleport‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 4‐1.