Specifications

show ipv6 ospf range
SecureStack C3 Configuration Guide 20-47
show ipv6 ospf range
Thiscommanddisplaysinformationaboutthearearangesforthespecifiedarea.
Syntax
show ipv6 ospf range areaid
Parameters
Defaults
None.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Example
Thisexampledisplaysrangeinformationforarea20.Table 20‐11onpage 20‐47describesthe
outputfields.
C3(su)->router#show ipv6 ospf range 20
Area ID IPv6 Prefix/Prefix Length Lsdb Type Advertisement
--------------- ------------------------- --------------- -------------
0.0.0.20 3345:1234::/64 Summary Link Enabled
Dead Timer Due Shows the amount of time, in seconds, to wait before the router
assumes the neighbor is unreachable.
State Shows the state of the neighboring routers.
Events Number of times this neighbor relationship has changed state, or
an error has occurred.
Retransmission Queue Length Is an integer representing the current length of the retransmission
queue of the specified neighbor router Id of the specified interface.
Table 20-10 Output of show ipv6 ospf neighbor routerid Command (Continued)
Output... What it displays...
areaid EntertheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
Table 20-11 Output of show ipv6 ospf range Command
Output... What it displays...
Area ID The area ID of the requested OSPFv3 area.
IPv6 Prefix/Prefix Length An IPv6 prefix and length which represents a configured area
range.
Lsdb Type The type of link advertisement associated with this area range.
Advertisement The status of the advertisement: enabled or disabled.