Specifications

show system lockout
SecureStack C3 Configuration Guide 3-7
show system lockout
Usethiscommandtodisplaysettingsforlockingoutusersafterfailedattemptstologintothe
system.
Syntax
show system lockout
Parameters
None.
Defaults
None.
Mode
Switchcommand,superuser.
Example
Thisexampleshowshowtodisplayuserlockoutsettings.Inthiscase,switchdefaultshavenot
beenchanged:
C3(su)->show system lockout
Lockout attempts: 3
Lockout time: 15 minutes.
Table 3‐1providesanexplanationofthecommandoutput.Thesesettingsareconfiguredwiththe
setsystemlockoutcommand(“setsystemlockout”onpage3‐8).
Table 3-1 show system lockout Output Details
Output What It Displays...
Lockout attempts Number of failed login attempts allowed before a read-write or read-only user’s
account will be disabled.
Lockout time Number of minutes the default admin user account will be locked out after the
maximum login attempts.