Specifications

show ipv6 ospf interface stats
SecureStack C3 Configuration Guide 20-43
show ipv6 ospf interface stats
Thiscommanddisplaysstatisticsforaspecificinterface.StatisticsaredisplayedonlyifOSPFv3is
enabled.
Syntax
show ipv6 ospf interface stats vlan vlanid
Parameters
Defaults
None.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Example
ThisexampledisplaystatisticsforVLAN80.Table 20‐8onpage 20‐44describestheoutputfields.
C3(su)->router>show ipv6 ospf interface stats vlan 80
OSPFv3 Area ID 0.0.0.20
Spf Runs 7
Area Border Router Count 0
AS Border Router Count 0
Area LSA Count 5
IPv6 Address FE80::211:88FF:FE56:5D8F/128
OSPF Interface Events 2
Virtual Events 0
Neighbor Events 0
External LSA Count 1
LSAs Received 1903
Originate New LSAs 4198
Sent Packets 1053
Received Packets 0
Discards 0
Bad Version 0
Virtual Link Not Found 0
Area Mismatch 0
Invalid Destination Address 0
No Neighbor at Source Address 0
Invalid OSPF Packet Type 0
Packet Type Sent Received
-------------------- ---------- ----------
Hello 1053 0
Database Description 0 0
LS Request 0 0
LS Update 0 0
LS Acknowledgement 0 0
vlanvlanid SpecifiestheVLANinterfaceforwhichtodisplaystatistics.