Specifications

show ipv6 ospf database
20-36 OSPFv3 Configuration
show ipv6 ospf database
ThiscommanddisplaysinformationaboutthelinkstatedatabasewhenOSPFv3isenabled.
Syntax
show ipv6 ospf [ areaid] database [{external | inter-area { prefix | router} | link |
network | nssa-external | prefix | router | unknown {area | as | link}}]
[lsid] [{adv-router [rtrid] | self-originate}]
Parameters
Defaults
Ifnoparametersareentered,LSAheadersforallareasaredisplayed.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Usage
Ifyouexecutethiscommandwithoutanyparameters,LSAheadersforallareasaredisplayed.Use
theareaidparametertodisplaydatabaseinformationforaspecificarea.Theotheroptional
parameterscanbeusedtospecifyaparticulartypeoflinkstateadvertisementtodisplay.
Examples
ThisexampledisplaystheoutputwhenanareaIDisspecified.Table 20‐5onpage 20‐38describes
theoutputfieldsinthisdisplay.
areaid (Optional)Displaydatabaseinformationaboutaspecificarea.Enterthe
areaIDinIPaddressformat(dotted‐quad)orasadecimal value.
external (Optional)DisplayexternalLSAs.
inter‐
area (Optional)Displayinter‐areaLSAs.
prefix (Optional)Displayintra‐areaPrefixLSAs.
router (Optional)DisplayrouterLSAs.
link (Optional)DisplaylinkLSAs.
network (Optional)DisplaynetworkLSAs.
nssa‐external (Optional)DisplayNSSAexternalLSAs.
unknown
{area|as|link}
(Optional)Displayunknownarea,unknownAS,orunknownlink
LSAs.
lsid (Optional)Specifythelinkstate
ID.
adv‐router[rtrid] (Optional)DisplaytheLSAsthatarerestrictedbytheadvertisingrouter.
Optionally,specifytherouterbyitsrouterID(rtrid),enteredasa32‐bit
dotted‐quadvalue.
self‐originate (Optional)DisplayLSAsthatareself‐originated.