Specifications

show ipv6 ospf asbr
SecureStack C3 Configuration Guide 20-35
show ipv6 ospf asbr
ThiscommanddisplaysOSPFv3routestoreachASborderrouters.
Syntax
show ipv6 ospf asbr
Parameters
None.
Defaults
None.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Example
TheoutputofthiscommandisdescribedinTable 20‐4onpage 20‐35.
C3(su)->router# show ipv6 ospf asbr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
----- -------------- ---- ------------ -------------------------------- --------
INTER 1.11.1.1 5 0.0.0.20 FE80::100:1111:FEE6:FB7A Vlan 35
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Next Hop Intf Address of the next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the
next hop.
Table 20-3 Output of show ipv6 ospf abr Command (Continued)
Output... What it displays...
Table 20-4 Output of show ipv6 ospf asbr Command
Output... What it displays...
Type The type of the route to the destination, which is one of the
following values:
INTRA — Intra-area route
INTER — Inter-area route
Router ID Router ID of the destination.
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Next Hop Address of the next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the
next hop.