Specifications
show ipv6 ospf area
SecureStack C3 Configuration Guide 20-33
Mode
Routerprivilegedexecution:C3(su)‐>router#
Example
TheoutputfieldsofthisexamplearedescribedinTable 20‐2onpage 20‐33.
C3(su)->router>show ipv6 ospf area 20
AreaID 0.0.0.20
External Routing Import NSSAs
Spf Runs 7
Area Border Router Count 0
Area LSA Count 5
Area LSA Checksum 188094
Stub Mode Disable
OSPF NSSA Specific Information.
Import Summary LSAs Enable
Redistribute into NSSA Enable
Default Information Originate TRUE
Default Metric 100
Default Metric Type Non-Comparable
Translator Role Candidate
Translator Stability Interval 40
Translator State Elected
Table 20-2 Output of show ipv6 ospf area Command
Output... What it displays...
AreaID Is the area ID of the requested OSPFv3 area.
External Routing Is a number representing the external routing capabilities for this
area.
Spf Runs Is the number of times that the intra-area route table has been
calculated using this area's link-state database.
Area Border Router Count The total number of area border routers reachable within this area.
Area LSA Count Total number of link-state advertisements in this area's link-state
database, excluding AS External LSAs.
Area LSA Checksum A number representing the Area LSA Checksum for the specified
Area ID excluding the external (LS type 5) link-state
advertisements.
Stub Mode Represents whether the specified area is a stub area or not. The
possible values are enabled and disabled. This is a configured
value.
Import Summary LSAs Shows whether to import summary LSAs (enabled or disabled).
OSPF Stub Metric Value Shows the metric value of the stub area. This field displays only if
the area is a configured as a stub area.
The following OSPFv3 NSSA specific information displays only if the area is configured as an NSSA.
Import Summary LSAs Shows whether to import summary LSAs into the NSSA.
Redistribute into NSSA Shows whether to redistribute information into the NSSA.
Default Information Originate Shows whether to advertise a default route into the NSSA