Specifications

area virtual-link retransmit-interval
20-20 OSPFv3 Configuration
area virtual-link retransmit-interval
ThiscommandconfigurestheretransmitintervalforthespecifiedOSPFv3virtualinterface.
Syntax
area areaid virtual-link neighborid retransmit-interval seconds
no area areaid virtual-link neighborid retransmit-interval
Parameters
Defaults
Thedefaultretransmitintervalis5seconds.
Mode
RouterOSPFv3configuration:C3(su)->router(Config-router)#
Usage
Usethenoformofthiscommandtoreturnaconfiguredvaluetothedefaultvalueof5seconds.
Example
Thisexamplesetstheretransmitintervalto10secondsforthespecifiedOSPFv3virtualinterface.
C3(su)->router(Config-router)# area 20 virtual-link 2.2.2.2 retransmit-interval
10
area virtual-link transmit-delay
ThiscommandconfiguresthetransmitdelayforthespecifiedOSPFv3virtualinterface.
Syntax
area areaid virtual-link neighborid transmit-delay seconds
no area areaid virtual-link neighborid transmit-delay
Parameters
areaid EntertheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid Specifythevirtuallinkneighborbymeansof itsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.
seconds Thevalueoftheretransmitintervalinseconds.Therangeisfrom
1to
3600seconds.
areaid EntertheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid Specifythevirtuallinkneighborbymeansof itsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.
seconds Thevalueofthetransmitdelayinseconds.Therangeisfrom
1to3600
seconds.