Specifications

area virtual-link
20-18 OSPFv3 Configuration
area virtual-link
ThiscommandcreatestheOSPFv3virtualinterfac eforthespecifiedareaandneighbor.
Syntax
area areaid virtual-link neighborid
no area areaid virtual-link neighborid
Parameters
Defaults
None.
Mode
RouterOSPFv3configuration:C3(su)->router(Config-router)#
Usage
ThevirtuallinkneighborisidentifiedbyitsrouterID.Usethenoformofthiscommandtodelete
theconfiguredOSPFv3virtualinterfaceidentifiedbyareaandneighbor.
Example
Thisexamplecreatesavirtualinterfaceforarea20andtheneighborwithrouterID2.2.2.2.
C3(su)->router(Config-router)# area 20 virtual-link 2.2.2.2
area virtual-link dead-interval
ThiscommandconfiguresthedeadintervalforthespecifiedOSPFv3virtualinterface.
Syntax
area areaid virtual-link neighborid dead-interval seconds
no area areaid virtual-link neighborid dead-interval
Parameters
Defaults
Thedefaultdeadintervalis40seconds.
areaid EntertheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid Specifythevirtuallinkneighborbymeansof itsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.
areaid EntertheareaIDinIPaddressformat(dotted‐quad)orasadecimal
value.
neighborid Specifythevirtuallinkneighborbymeansof itsrouterID.Therouter
IDmustbeenteredin32‐bitdotted‐quadnotation.
seconds Thevalueofthedeadintervalinseconds.Therangeisfrom
1to65535
seconds.