Specifications

maximum-paths
20-8 OSPFv3 Configuration
Usage
Whenthenumberofnon‐defaultAS‐external‐LSAsinarouterʹslink‐statedatabasereachesthe
externalLSDBlimit,therouterentersoverflowstate.Therouterneverholdsmorethanthe
externalLSDBlimitnon‐defaultAS‐external‐LSAsinitdatabase.TheexternalLSDBlimitMUST
beset
identicallyinallroutersattachedtotheOSPFv3backboneand/oranyregularOSPFv3area.
Thenoformofthiscommandresetsthelimittothedefaultvalueof‐1,meaningnolimit.
Example
ThisexamplesetstheexternalLSDBlimitto1000.
C3(su)->router(Config-router)# external-lsdb-limit 1000
maximum-paths
ThiscommandsetsthenumberofpathsthatOSPFv3canreportforagivendestination.
Syntax
maximum-paths maxpaths
no maximum-paths
Parameters
Defaults
Thedefaultvalueis4.
Mode
RouterOSPFv3configuration:C3(su)->router(Config-router)#
Usage
Usethenoformofthiscommandtoresetthemaximumnumberofpathstothedefaultvalueof4.
Example
Thisexamplesetsthemaximumnumberofpathsforagivendestinationto3.
C3(su)->router(Config-router)# maximum-paths 3
maxpaths Therangeformaxpathsisfrom1to4.