Specifications

exit-overflow-interval
SecureStack C3 Configuration Guide 20-7
exit-overflow-interval
ThiscommandconfigurestheexitoverflowintervalforOSPFv3.
Syntax
exit-overflow-interval seconds
no exit-overflow-interval
Parameters
Defaults
Thedefaultintervalvalueis0.
Mode
RouterOSPFv3configuration:C3(su)->router(Config-router)#
Usage
TheexitoverflowintervalisthenumberofsecondsafterenteringOverflowstatethatarouterwill
waitbeforeattemptingtoleavetheOverflowState.Thisallowstheroutertoagainoriginate
non‐defaultAS‐external‐LSAs.Whensetto0,therouterwillnotleaveOverflowStateuntil
restarted.
The
noformofthiscommandresetstheintervaltothedefaultof0.
Example
Thisexamplesetstheexitoverflowintervalto10seconds.
C3(su)->router(Config-router)# exit-overflow-interval 10
external-lsdb-limit
ThiscommandconfigurestheexternalLSDBlimitforOSPFv3.
Syntax
external-lsdb-limit limit
no external-lsdb-limit
Parameters
Defaults
Thedefaultvalueis‐1.
Mode
RouterOSPFv3configuration:C3(su)->router(Config-router)#
seconds Therangeforsecondsisfrom0to2147483647.
limit Therangeforlimitisfrom‐1to2147483647.Avalueof‐1meansthat
thereisnolimit.