Specifications

ipv6 dhcp pool
SecureStack C3 Configuration Guide 19-5
Mode
Routerglobalconfiguration:C3(su)‐>router(Config)#
Usage
DHCPv6poolsareusedtospecifyinformationfortheDHCPv6servertodistributetoDHCPv6
clients.ThesepoolsaresharedbetweenmultipleinterfacesoverwhichDHCPv6server
capabilitiesareconfigured.
Afterexecutingthiscommandandenteringpoolconfigurationmode,youcanreturntoglobal
configurationmodebyexecutingtheexitcommand.
Poolconfigurationcommandsaredescribed
inthesection“AddressPoolConfigurationCommands”onpage 19‐6.
Usethenoformofthiscommandtoremoveaspecifiedpool.
Example
ThisexampleentersDHCPpoolconfigurationmodetoconfigurethepoolnamed“PoolA.”
C3(su)->router(Config)# ipv6 dhcp pool PoolA
C3(su)->router(Config-dhcp6s-pool)#