Specifications

ipv6 dhcp relay-agent-info-remote-id-subopt
19-4 DHCPv6 Configuration
Example
ThisexamplesetstheRelayAgentInformat ion Optionvalueto82.
C3(su)->router(Config)# ipv6 dhcp relay-agent-info-opt 82
ipv6 dhcp relay-agent-info-remote-id-subopt
ThiscommandconfiguresanumbertorepresenttheDHCPv6RelayAgentRemote‐IDsub‐option.
Syntax
ipv6 dhcp relay-agent-info-remote-id-subopt option
Parameters
Defaults
ThedefaultvalueoftheDHCPv6RelayAgentRemote‐ID sub ‐optionis1.
Mode
Routerglobalconfiguration:C3(su)‐>router(Config)#
Usage
Thissub‐optionmaybeaddedby DHCPrelayagentswhichterminateswitchedorpermanent
circuitsandhavemechanismstoidentifytheremotehostendofthecircuit.RefertoRFC3046for
moreinformation.
Example
ThisexamplesetstheRelayAgentRemote ‐ID sub‐optionvalueto2.
C3(su)->router(Config)# ipv6 dhcp relay-agent-info-remote-id-subopt 2
ipv6 dhcp pool
ThiscommandallowsyoutoenterIPv6DHCPpoolconfigurationmodeforthespecifiedpool
name.
Syntax
ipv6 dhcp pool pool-name
no ipv6 dhcp pool pool-name
Parameters
Defaults
None.
option Thevalueofoptionmayrangefrom1to65535.Thedefaultvalueis1.
pool‐name Specifiesthenameofthepooltobeconfigured.Poolnamesmustbeless
than31alpha‐numericcharacters.