Specifications

ipv6 dhcp enable
SecureStack C3 Configuration Guide 19-3
ipv6 dhcp enable
ThiscommandenablesDHCPv6ontherouter.
Syntax
ipv6 dhcp enable
no ipv6 dhcp enable
Parameters
None.
Defaults
Bydefault,DHCPv6isdisabled.
Mode
Routerglobalconfiguration:C3(su)‐>router(Config)#
Usage
UsethiscommandtoenableDHCPv6ontherouter.Usethenoformofthiscommandtodisable
DHCPv6afterithasbeenenabled.
Example
ThisexampleenablesDHCPv6.
C3(su)->router(Config)# ipv6 dhcp enable
ipv6 dhcp relay-agent-info-opt
ThiscommandconfiguresanumbertorepresenttheDHCPv6RelayAgentInformationOption.
Syntax
ipv6 dhcp relay-agent-info-opt option
Parameters
Defaults
ThedefaultvalueoftheDHCPv6RelayAgentInformationOptionis32.
Mode
Routerglobalconfiguration:C3(su)‐>router(Config)#
Usage
TheDHCPv6RelayAgentInformationOptionallowsforvarioussub‐optionstobeattachedto
messagesthatarebeingrelayedbythelocalroutertoarelayserver.Therelayservermayinturn
usethisinformationindetermininganaddresstoassigntoaDHCPv6 client.RefertoRFC3046
for
moreinformation.
option Thevalueofoptionmayrangefrom32to65535.Thedefaultvalueis32.