Specifications

show ipv6 traffic
SecureStack C3 Configuration Guide 18-29
IPv6 Routing Table Summary - 6 entries
Connected Routes 3
Static Routes 3
OSPF Routes 0
Intra Area Routes 0
Inter Area Routes 0
External Type-1 Routes 0
External Type-2 Routes 0
Total routes 6
Number of Prefixes:
/0: 1, /64: 5
show ipv6 traffic
UsethiscommandtoshowtrafficandstatisticsforIPv6andICMPv6.
Syntax
show ipv6 traffic [interface]
Parameters
Defaults
Ifnointerfaceisspecified,informationabouttrafficonallinterfacesisdisplayed.
Mode
Routerprivilegedexecution:C3(su)‐>router#
Usage
Specifyalogical,loopback,ortunnelinterfacetoviewinformationabouttrafficonaspecific
interface.Ifyoudonotspecifyaninterface,thecommanddisplaysinformationabouttrafficonall
interfaces.
Table 18-4 Output of the show ipv6 summary Command
Output... What it displays...
Connected Routes Total number of connected routes in the routing table.
Static Routes Total number of static routes in the routing table.
OSPF Routes Total number of routes installed by OSPFv3 protocol.
Number of Prefixes Summarizes the number of routes with prefixes of different lengths
Total Routes Shows the total number of routes in the routing table.
interface (Optional)Specifiestheinterfac eforwhichtrafficinformationshouldbe
displayed.Interfacecanbeoftheform:
vlanvlan‐id
tunneltunnel‐id
loopbackloop‐id