Specifications

show ipv6 interface
SecureStack C3 Configuration Guide 18-23
show ipv6 interface
ThiscommanddisplaysinformationaboutoneorallconfiguredIPv6interfaces.
Syntax
show ipv6 interface [vlan vlan-id | tunnel tunnel-id | loopback loop-id]
Parameters
Defaults
Ifnointerfaceisspecified,informationaboutallIPv6interfacesisdisplayed.
Mode
Routerprivilegedexecution:C3(su)>router#
Routerglobalconfiguration:C3(su)>router(Config)#
Usage
UsethiscommandtodisplaytheusabilitystatusofIPv6interfa ces.
IfanIPv6prefixisconfiguredonaninterface,thefollowinginformationalsodisplays:
•TheIPv6prefixandlength
•Theconfiguredpreferredlifetimevalue
•Theconfiguredvalidlifetimevalue
•Thestatusoftheonlinkflag,eitherenabledordisabled
•Thestatusof
theautonomousaddressconfigurationflag(autoconfig),eitherenabled or
disabled.
Examples
ThisexampledisplaysinformationaboutIPv6interfaceVLAN7.
C3(su)->router>show ipv6 interface vlan 7
Vlan 7 Administrative Mode Enabled
Vlan 7 IPv6 Routing Operational Mode Enabled
IPv6 is Enabled
IPv6 Prefix is FE80::211:88FF:FE55:4A7F/128
3FFE:501:FFFF:101:211:88FF:FE55:4A7F/64
3FFD::211:88FF:FE55:4A7F/64
Routing Mode Enabled
Interface Maximum Transmit Unit 1500
Router Duplicate Address Detection Transmits 1
Router Advertisement NS Interval 0
Router Lifetime Interval 1800
Router Advertisement Reachable Time 0
Router Advertisement Interval 600
Router Advertisement Managed Config Flag Enabled
Router Advertisement Other Config Flag Enabled
Router Advertisement Suppress Flag Disabled
vlanvlanid
tunneltunnelid
loopbackloopid
(Optional)Displayinformationonlyaboutthespecifiedinterface.