Specifications

General Configuration Commands
SecureStack C3 Configuration Guide 18-3
General Configuration Commands
ThecommandsforgeneralconfigurationofIPv6parametersare:
ipv6 forwarding
ThiscommandenablesordisablesIPv6forwardingontherouter.
Syntax
ipv6 forwarding
no ipv6 forwarding
Parameters
None.
Defaults
IPv6forwardingisenabled.
Mode
Routerglobalconfiguration:C3(su)‐>router(Config)#
Usage
ThenoformofthiscommanddisablesIPv6forwardingontherouter.
Example
ThisexampledisablesIPv6forwarding.
C3(su)->router(Config)# no ipv6 forwarding
For information about... Refer to page...
ipv6 forwarding 18-3
ipv6 hop-limit 18-4
ipv6 route 18-4
ipv6 route distance 18-5
ipv6 unicast-routing 18-6
ping ipv6 18-7
ping ipv6 interface 18-8
traceroute ipv6 18-9