Specifications

set switch description
SecureStack C3 Configuration Guide 2-11
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoreplicatethemanagementimagefiletoallswitchesinthestack:
C3(su)->set switch copy-fw
Are you sure you want to copy firmware? (y/n) y
Code transfer completed successfully.
set switch description
Usethiscommandtoassignanametoaswitchinthestack.
Syntax
set switch description unit description
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoassignthename“FirstUnit”toswitchunit1inthestack:
C3(su)->set switch description 1 FirstUnit
set switch movemanagement
Usethiscommandtomovemanagementswitchfunctionalityfromone switchtoanother.
Syntax
set switch movemanagement fromunit tounit
Parameters
Defaults
None.
unit Specifiesaunitnumberfortheswitch.
description Specifiesatextdescriptionfortheunit.
fromunit Specifiestheunitnumberofthecurrentmanagementswitch.
tounit Specifiestheunitnumberofthenewly‐designatedmanagementswitch.