Specifications

show ipv6 status
17-2 IPv6 Management
show ipv6 status
UsethiscommandtodisplaythestatusoftheIPv6managementfunction.
Syntax
show ipv6 status
Parameters
None.
Defaults
None.
Mode
Switchmode,read‐only.
Example
ThisexampleshowshowtodisplayIPv6managementfunctionstatus.
C3(ro)->show ipv6 status
IPv6 Administrative Mode: Disabled
set ipv6
UsethiscommandtogloballyenableordisabletheIPv6managementfunction.
Syntax
set ipv6 {enable|disable}
Parameters
Defaults
Bydefault,IPv6managementisdisabled.
Mode
Switchmode,read‐write.
Usage
WhenyouenableIPv6managementontheswitch,thesystemautomaticallygeneratesalink‐local
hostaddressfortheswitchfromthehostMACaddress.YoucansetadifferenthostIPv6address
withthesetipv6addresscommand.
Example
ThisexampleshowshowtoenableIPv6management.
C3(su)-> set ipv6 enable
C3(su)->show ipv6 status
enable|disable EnableordisabletheIPv6managementfunction.