Specifications

show ip pimsm rp
16-62 IPv4 Routing Protocol Configuration
show ip pimsm rp
ThiscommanddisplaysthePIMinformationforcandidateRendezvousPoints(RPs)forallIP
multicastgroupsorforaspecificgroupaddress.Theinformationinthetableisdisplayedforeach
IPmulticastgroup.
Syntax
show ip pimsm rp {group-address group-mask | all | candidate}
Parameters
Defaults
None.
Mode
Anyroutermode.
Examples
ThisexampleshowshowtodisplaytheRPsetforaspecificgroupaddress.
C3(su)->router> show ip pimsm rp 224.0.0.0 240.0.0.0
RP SET TABLE
Group
Address Group Mask Address Hold Time Expiry Time Component C-RP Priority
(hh:mm:ss) (hh:mm:ss)
--------- ---------- ----------- ---------- ----------- --------- -----------
224.0.0.0 240.0.0.0 192.168.30.2 00:02:15 00:02:30 1 0
Table 16‐12providesanexplanationofthecommandoutput.
ThisexampleshowshowtodisplaythecandidateRPsforeachgroupaddress.
group‐address ThemulticastgroupIPaddress.
group‐mask Themulticastgroupaddresssubnetmask.
all Forallknowngroupaddresses.
candidate DisplayPIM‐SMcandidate‐RPtableinformation.
Table 16-12 show ip pimsm rp Output Detail
Output What it displays
Group Address The address of the group for which the RP set is displayed.
Group Mask The mask of the group address.
Address The IP address of the RP.
Hold Time The hold time of the RP.
Expiry Time The minimum time remaining before the RP will be declared down.
Component A number which uniquely identifies the component. Each protocol instance
connected to a separate domain should have a different index value.
C-RP Priority The candidate-RP priority of the RP.