Specifications

ip pimsm
SecureStack C3 Configuration Guide 16-55
ip pimsm
ThiscommandsetsadministrativemodeofPIM‐SMmulticastroutingacrosstherouterto
enabled.IGMPmustbeenabledbeforePIM‐SMcanbeenabled.Bydefault,bothIGMPandPIM
aregloballydisabled.ThenoformofthiscommanddisablesPIMacrosstheentirestack.
Syntax
ip pimsm
no ip pimsm
Parameters
None.
Defaults
None.
Mode
Globalrouterconfiguration:C3(su)‐>router(Config)#
Example
ThisexampleshowshowtogloballyenableanddisablePIM:
C3(su)->router(Config)# ip pimsm
C3(su)->router(Config)# no ip pimsm
ip pimsm staticrp
ThiscommandisusedtocreateamanualRendezvousPointIPaddressforthePIM‐SMrouter.
ThenoformofthiscommandremovesapreviouslyconfiguredRP.
Syntax
ip pimsm staticrp ipaddress groupadress groupmask
no ip pimsm staticrp ipaddress groupadress groupmask
Parameters
Defaults
None.
Mode
GlobalRouterconfiguration:C3(su)‐>router(Config)#
Example
ThisexampleshowshowtosetanRPforaspecificmu lticastgrou p.
C3(su)->router(Config)# ip pimsm staticrp 192.15.18.3 224.0.0.0 240.0.0.0
ipaddress TheIPaddressoftheRendezvousPoint
groupadress ThegroupaddresssupportedbytheRendezvousPoint
groupmask Thegroupmaskforthegroupaddress