Specifications

priority
SecureStack C3 Configuration Guide 16-49
priority
UsethiscommandtosetapriorityvalueforaVRRProuter.Thenoformofthiscommandclears
theVRRPpriorityconfiguration.
Syntax
priority vlan vlan-id vrid priority-value
no priority vlan vlan-id vrid priority-value
Parameters
Defaults
None.
Mode
Routerconfiguration:C3(su)‐>router(Config‐router)#
Example
ThisexampleshowshowsetaVRRPpriorityof200ontheVLAN1interface,VRID1:
C3(su)->router(Config)#router vrrp
C3(su)->router(Config-router)#priority vlan 1 1 200
vlanvlan‐id Specifies thenum berofthe VLANonwhichtoconfigureVRRPpriority.
ThisVLANmustbeconfiguredforIProutingasdescribedin“Pre‐Routing
ConfigurationTasks”onpage14‐1.
vrid SpecifiesauniqueVirtualRouterID(VRID)associatedwiththerouting
interface.Validvaluesarefrom1
to255.
priority‐value SpecifiestheVRRPpriorityvaluetoassociatewiththevrid.Validvaluesare
from1to254,withthehighestvaluesettingthehighestpriority.Priority
valueof255isreservedfortheVRRProuterthatownstheIPaddress
associatedwiththevirtualrouter.Priority
0isreservedforsignalingthatthe
masterhasstoppedworkingandthebackuproutermusttransitionto
masterstate.