Specifications

create
SecureStack C3 Configuration Guide 16-47
create
UsethiscommandtocreateaVRRPsession.EachSecureStackC3systemsupportsupto20VRRP
sessions.ThenoformofthiscommanddisablestheVRRPsession.
Syntax
create vlan vlan-id vrid
no create vlan vlan-id vrid
Parameters
Defaults
None.
Mode
Router configuration: C3(su)->router(Config-router)#
Usage
ThiscommandmustbeexecutedtocreateaninstanceofVRRPonaroutinginterface(VLAN)
beforeanyotherVRRPsettingscanbeconfigured.
Example
ThisexampleshowshowtocreateaVRRPsessionontheVLAN1 interfacewithaVRIDof1:
C3(su)->router(Config)#router vrrp
C3(su)->router(Config-router)#create vlan 1 1
vlanvlan‐id Specifies thenum berofthe VLANonwhichtocreateaVRRPsession.This
VLANmustbeconfiguredforIProutingasdescribedin“Pre‐Routing
ConfigurationTasks”onpage14‐1.
vrid SpecifiesauniqueVirtualRouterID(VRID)toassociatewiththerouting
interface.