Specifications

ip irdp broadcast
SecureStack C3 Configuration Guide 16-43
Defaults
None.
Mode
Interfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Example
ThisexampleshowshowtosetIRDPpreferenceontheVLAN1interfacesothattheinterface’s
addressmaystillbeadvertised,butcannotbeusedbyneighboringhostsasadefaultrouter
address:
C3(su)->router(Config)#interface vlan 1
C3(su)->router(Config-if(Vlan 1))#ip irdp preference -2147483648
ip irdp broadcast
UsethiscommandtoconfigureIRDPtousethelimitedbroadcastaddressof255.255.255.255.The
defaultismulticastwithaddress224.0.0.1.ThenoformofthiscommandresetsIRDPtouse
multicastonIPaddress224.0.0.1.
Syntax
ip irdp broadcast
no ip irdp broadcast
Parameters
None.
Defaults
None.
Mode
Interfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Example
ThisexampleshowshowtoenablebroadcastforIRDPontheVLAN1interface:
C3(su)->router(Config)#interface vlan 1
C3(su)->router(Config-if(Vlan 1))#ip irdp broadcast