Specifications

show switch
SecureStack C3 Configuration Guide 2-7
show switch
Usethiscommandtodisplayinformationaboutoneormoreunitsinthestack.
Syntax
show switch [status] [unit]
Parameters
Defaults
Ifnotspecified,statusandotherconfigurationinformationaboutallunitswillbedisplayed.
Mode
Switchcommand,read‐only.
Usage
Afterastackhasbeenconfigured,youcanusethiscommandtophysicallyconfirmtheidentityof
eachunit.Whenyouenterthecommandwithaunitnumber,theMGRLEDofthespecified
switchwillblinkfor10seconds.ThenormalstateofthisLEDisoffformemberunits
andsteady
greenforthemanagerunit.
Examples
Thisexampleshowshowtodisplayinformationaboutallswitchunitsinthestack:
C3(rw)->show switch
Management Preconfig Plugged-in Switch Code
Switch Status Model ID Model ID Status Version
------ ------------ ------------- ------------- --------------------- --------
1 Mgmt Switch C3G124-24 C3G124-24 OK 01.00.xx
2 Stack Member C3G124-24 C3G124-24 OK 01.00.xx
3 Stack Member C3G124-24 C3G124-24 OK 01.00.xx
4 Stack Member C3G124-24 C3G124-24 OK 01.00.xx
5 Stack Member C3G124-24 C3G124-24 OK 01.00.xx
6 Stack Member C3G124-24 C3G124-24 OK 01.00.xx
7 Stack Member C3G124-24 C3G124-24 OK 01.00.xx
8 Stack Member C3G124-24 C3G124-24 OK 01.00.xx
Thisexampleshowshowtodisplayinformationaboutswitchunit1inthestack:
C3(ro)->show switch 1
Switch 1
Management Status Management Switch
Hardware Management Preference Unassigned
Admin Management Preference Unassigned
Switch Type C3G124-24
Preconfigured Model Identifier C3G124-24
Plugged-in Model Identifier C3G124-24
Switch Status OK
Switch Description Enterasys Networks, Inc. C3 -- Model
C3G124-24
Detected Code Version 01.00.xx
status (Optional)Displayspowerandadministrativestatusinformationforone
ormoreunitsinthestack.
unit (Optional)Specifiestheunit(s)forwhichinformationwilldisplay.