Specifications

Configuring OSPF
SecureStack C3 Configuration Guide 16-13
• Define an area as a stub area. “area stub” on page 16-24
• Set the cost value for the default route that
is sent into a stub area.
“area default cost” on page 16-25
• Define an area as an NSSA. “area nssa” on page 16-26
Create virtual links. “area virtual-link” on page 16-27
Enable redistribution from non-OSPF
routes.
“redistribute” on page 16-28
Monitor and maintain OSPF. “show ip ospf” on page 16-29
“show ip ospf neighbor” on page 16-33
“show ip ospf interface” on page 16-32
“show ip ospf neighbor” on page 16-33
“show ip ospf virtual-links” on page 16-34
“clear ip ospf process” on page 16-35
Table 16-2 OSPF Configuration Task List and Commands (Continued)
To do this... Use these commands...