Specifications

ip rip send version
SecureStack C3 Configuration Guide 16-5
ip rip send version
UsethiscommandtosettheRIPversion(s)forupdatepacketstransmittedonaninterface.Theno
formofthiscommandrestorestheversionofupdatepacketsthatwastransmittedbytheRIP
router.
Syntax
ip rip send version {1 | 2 | r1compatible}
no ip rip send version
Parameters
Defaults
None.
Mode
Interfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Example
ThisexampleshowshowtosettheRIPsendversionto2forpacketstransmittedontheVLAN 1
interface:
C3(su)->router(Config)#interface vlan 1
C3(su)->router(Config-if(Vlan 1))#ip rip send version 2
ip rip receive version
UsethiscommandtosettheRIPversion(s)forupdatepacketsacceptedontheinterface.Theno
formofthiscommandrestoresthedefaultversionoftheRIProuterupdatepacketsthatare
acceptedontheinterface.
Syntax
ip rip receive version {1 | 2 | 1 2 | none}
no ip rip receive version
Parameters
1 SpecifiesRIPversion1.
2 SpecifiesRIPversion2.Thisisthedefaultsetting.
r1compatible Specifies thatpacketsbesentasversion2packets,buttransmitstheseas
broadcastpacketsratherthanmulticastpacketssothatsystemswhichonly
understandRIPversion1canreceivethem.
1 SpecifiesRIPversion1.
2 SpecifiesRIPversion2.Thisisthedefaultsetting.
12 SpecifiesRIPversions1and2.
none SpecifiesthatnoRIProuteswillbeprocessedonthisinterface.