Specifications

router rip
SecureStack C3 Configuration Guide 16-3
router rip
UsethiscommandtoenableordisableRIPconfigurationmode.Thenoformofthiscommand
disablesRIP.
Syntax
router rip
no router rip
Parameters
None.
Defaults
None.
Mode
Globalconfiguration:C3(su)‐>router(Config)#
Usage
YoumustexecutetherouterripcommandtoenabletheprotocolbeforecompletingmanyRIP‐
specificconfigurationtasks.Fordetailsonenablingconfigurationmodes,refertoTable 14‐2in
“EnablingRouterConfigurationModes”onpage14‐3.
Example
ThisexampleshowshowtoenableRIP:
C3(su)->router#configure
C3(su)->router(Config)#router rip
C3(su)->router(Config-router)#
ip rip enable
UsethiscommandtoenableRIPonaninterface.ThenoformofthiscommanddisablesRIPonan
interface:
Syntax
ip rip enable
no ip rip enable
Parameters
None.
Defaults
None.
Mode
Interfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#