Specifications

show interface tunnel
SecureStack C3 Configuration Guide 15-11
show interface tunnel
Thiscommanddisplaysinformationaboutaconfiguredtunnelinterface.
Syntax
show interface tunnel tunnel-id
Parameters
Defaults
None.
Mode
Routerglobalconfiguration:C3(su)‐>router(Config)#
Routerprivilegedexec:C3(su)‐>router#
Usage
Usethiscommandtodisplaygeneralinterfaceinformation.Referto“QueryCommands”on
page 18‐22inChapter 18,IPv6Configurationforadescriptionoftheshowipv6interfacetunnel
command.
Example
Thisexampleshowstheoutputofthiscommand.
C3(su)->router(Config)#show interface tunnel 1
Tunnel 1 is Operationally DOWN
The name of this device is Tunnel 1
The MTU is 1480 bytes
tunnel‐id Specifiesthetunnelforwhichtodisplayinformation.